The Tools Dialog Box - Nikon Scanners Software Reference Manual

Introduction to the Nikon Scanner Plug-in
Figure 7.21b The small Gamma Curve Editor dialog box – Windows.
This Gamma Curve Editor dialog box is invoked from the Scan dialog box by
clicking on the Curve button, shown in Figure 7.22.
Figure 7.22 The Gamma Curve Editor button.

The Tools Dialog Box

The Tools dialog box, shown in Figures 7.23a and 7.23b for Coolscan –
Macintosh and Windows, and in Figures 7.24a and 7.24b for LS-3510AF – Macintosh
and Windows, enables you to perform basic diagnostic functions on your scanner. Do
not be put off by the complexity of this dialog. There are three items that you will need
to be concerned with. These are the U
F check box, the C
OCUS
GPIB selection buttons. The rest of the Tools dialog box can be ignored for now, since
its primary function is service related. I
all the controls, but be aware that large amounts of data are generated by certain service
functions, so it is best to ignore them unless directed to perform an operation by a
Nikon service technician.
Page 64
L S
SE ARGE
L button (LS-3510AF only) and the SCSI and
ALIBRATE AMP
NTERACTIVE HELP
Chapter 7
check box, the S
CREEN CANNING
will provide an explanation of
Software Reference for Scanners