Nikon Scanners Software Reference Manual page 70

Introduction to the Nikon Scanner Plug-in
Most scanning operations can be performed from this dialog box, including
selecting the film type, previewing the image, fine focusing, cropping the image, and
performing basic brightness, contrast and color balance tasks.
Windows: The Nikon Scanner plug-in's main scanning dialog box is called the
Main Scan dialog. There are two versions of this Scan dialog, designed to best accom-
modate the wide variety of available monitor sizes. These two different sized dialog
boxes offer similar functionality, with the dialog box for large screens offering a substan-
tially larger preview, making such operations as color correction and cropping easier and
more precise. There are only some minor differences involving the position of the con-
trols within the Scan dialog.
The scan dialog shown in Figure 7.8 is the dialog used for monitors that have res-
olutions of 800 x 600 pixels or larger with small fonts, and 1024 x 768 pixels or larger
with large fonts.
Figure 7.8 The Nikon Scanner plug-in's Main Scan dialog for monitors that have reso-
lutions of 800 x 600 pixels or greater using small fonts, or 1024 x 768 pixels or greater
using large fonts – Windows (Coolscan connected).
The Scan dialog shown in Figure 7.9 is the default dialog size for monitors that
have resolutions of 640 x 480 pixels with small fonts, and 800 x 600 pixels with large
fonts.
Page 56
Chapter 7
Software Reference for Scanners