Summary; The User-Named Method - Nikon Scanners Software Reference Manual

Setting and Restoring the Nikon Plug-in State – Macintosh
R button is clicked, the plug-in state will be set to these settings, not the factory
ESET
defaults.
The factory default settings can be recalled at any time by deleting the preferences
!
file, then restarting the application. If there is no preferences file available, the
plug-in will automatically use the factory defaults settings.

Summary

To save the current state as the default state:
• Click on the S
To invoke the default state as the current state:
• Click on the R
To restore the factory defaults as the default state:
• Remove the preferences file from the system folder and restart the application.

The User-Named Method

You may desire to have several different scanner settings readily available. To
accomplish this, you can load and save these settings into user-named settings files.
These files are named by following the standard Macintosh file system conventions.
Clicking on the S
S dialog, as shown in Figure 8.6. Once the settings file is named, the current
ETTINGS
state will be saved. It can be restored at any time through the L
Figure 8.6 The S
Page 76
D button.
ET EFAULTS
button.
ESET
S button brings up the operating system's S
AVE ETTINGS
S dialog.
AVE ETTINGS
Chapter 8
AVE
S button.
OAD ETTINGS
Software Reference for Scanners