Performing A Final Scan; Saving The Scan - Nikon Scanners Software Reference Manual

Performing a Preview or Final Scan

Performing a Final Scan

Once you are satisfied with the scanning settings, a final scan can be invoked by
clicking on the S
window titled "U

Saving the Scan

Macintosh: You can then save the resulting scan to disk by pulling down the F
menu to activate the S
appear prompting you to enter the new file name to be used for the scan. This scan file
can be saved in two 24-bit true color file formats, either PICT or TIFF 5.0 file.
Figure 10.12 The scanned image is saved to a disk file
through the S
Windows: You can then save the resulting scan to disk by pulling down the F
menu to activate the S
appear prompting you to enter the new file name to be used for the scan. This scan file
can be stored in two 24-bit true color file formats, either TGA (Targa) or BMP
(Windows Bitmap Files).
Page 90
button. Upon completion of the scan, an image will appear in a
CAN
–1."
NTITLED
A ... dialog, as seen in Figure 10.12. A dialog box will
AVE S
A ... file dialog box – Macintosh.
AVE S
A ... dialog, as seen in Figure 10.13. A dialog box will
AVE S
Chapter 10
ILE
ILE
Software Reference for Scanners