Configuring Mrp - Siemens SCALANCE X-200 Operating Instructions Manual

PROFINET IO functionality
8.2 Settings in HW Config
8.2.2

Configuring MRP

Procedure
1. In STEP 7, open the properties dialog of the PROFINET interface of the switch (double-
2. Open the "Media Redundancy" tab.
You can set the following parameters in the "MRP configuration" box to configure MRP for
the device:
● Domain
● Role
● Ring port
● Diagnostics interrupts
● Redundancy parameters are not set by STEP 7
250
click on the slot "PN-IO").
Figure 8-4 Properties dialog of the PROFINET interface, "Media Redundancy" tab
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200