The "System I&M" Wbm Menu - Siemens SCALANCE X-200 Operating Instructions Manual

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
6.3.5.4 The "System I&M" WBM menu
System Identification & Maintenance
The following dialog shows information on the parameters for Identification & Maintenance.
The following screen contains information on device-specific vendor and maintenance data
such as the order number, serial number, version numbers etc.
Figure 6-10
I&M0
Here, you can see the individual parameters for Identification & Maintenance.
I&M 1
Function tag
Here, you can enter the function tag (plant designation).
Location tag
Here, you can enter the location tag (location identifier).
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
System Identification & Maintenance
Configuration / diagnostics using remote mechanisms
169