Siemens SCALANCE X-200 Operating Instructions Manual page 255

Partners
● Partner port
● Changing partner ports
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
Here you can configure the topology that will be monitored. To do this, select the port of
another device that is connected to the currently selected port in the "Partner Port" drop-
down list:
– "Alternating partner port"
Select this option if you want alternating ports to be monitored.
– "Any partner"
Select this setting, if you do not want the topology be monitored.
The is the default setting.
Here, select all ports to be monitored when ports alternate.
PROFINET IO functionality
8.2 Settings in HW Config
255