Led Display During Startup - Siemens SCALANCE X-200 Operating Instructions Manual

FOC diagnostic display (yellow LED)
The diagnostic status of the SC RJ interfaces is signaled by an additional LED per port.
The LED signals that the device can adopt the following statuses:
Device type SCALANCE
X202-2P IRT PRO
X201-3P IRT PRO
X202-2P IRT
X201-3P IRT
X200-4P IRT
1. Signaling maintenance is necessary. Maintenance should be performed to ensure
2. Relevant only when the link exists:
3.28.7

LED display during startup

LED display during startup
When a device starts up, the following displays light up in the order shown:
1. Power LEDs (green) light up immediately after turning on the power.
2. Port LEDs (yellow) light up for approx. 6 seconds, the red LED is off.
3. Port LEDs go off, the red error LED is lit for approx. 20 seconds.
4. After the port LEDs go off, the correct link status is displayed after approx. 2 seconds.
5. The IE Switch X-200 is now ready for operation.
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
LED lit yellow
1
1
1
1
1
problem-free operation.
The available link power margin is adequate for problem-free operation.
Product properties
3.28 Displays
LED not lit
2
2
2
2
2
127