Page 1
Connect X200 CXG3.X200 Connect X200 for the cloud integration of Siemens Smart infrastructure as well as third-party systems ● 2-port Ethernet switch for LAN (incl. Daisy Chaining) ● 1-port Ethernet for WAN ● 2 EIA-485 interfaces ● USB interface for 4G dongles ●...
Page 2
Application Connect X200 is a physical device that is the connecting point between the cloud and con- trolled/monitored devices, such as controllers, sensors, and actuators in the building.
Page 3
Continuously OFF IP address not assigned to LAN port Continuously ON IP address assigned to LAN port COM1 / 2 TX Yellow Flashing Communication Continuously OFF No communication to subsystem COM1 / 2 RX Yellow Siemens A6V11974867_en--_b Smart Infrastructure 2021-08-30...
Page 4
LAN port for the duration of 15 min. Product documentation Related documents such as the environmental declarations, CE declarations, etc., can be downloaded from the following Internet address: https://siemens.com/bt/download Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage.
Page 5
DC 24 V -15 / +20 % (SELV / PELV) or DC 24 V Class 2 (US) Functional ground (US) The terminal for the functional ground must be connected on the installation side with the building Functional earth grounding system (PE). Siemens A6V11974867_en--_b Smart Infrastructure 2021-08-30...
2 x 0.6 mm ∅ to 1.5 mm (22 to 16 AWG) Stripping length 6...7.5 mm (0.24...0.29 in) Screwdriver Slot screws, screwdriver size 1 with shaft ø = 3 mm Max. tightening torque 0.6 Nm (0.44 lb ft) Siemens A6V11974867_en--_b Smart Infrastructure 2021-08-30...
Page 7
Temperature -5...50 °C (23...122 °F) (for details see chapter Mounting) Air humidity 5...95 % (non-condensing) Mechanical ambient conditions ● ● Transport per IEC/EN 60721-3-2 Class 2M4 ● ● Operation as per IEC/EN 60721-3-3 Class 3M11 Siemens A6V11974867_en--_b Smart Infrastructure 2021-08-30...
1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation FCC Caution: Changes or modifications not expressly approved by Siemens Switzerland Ltd. could void user authority to operate the equipment. United States representative https://new.siemens.com/us/en/products/buildingtechnologies/home.html...
Interfaces EIA-485 68, 69, 70 COM2 Warranty Technical data on specific applications are valid only together with Siemens products listed under "Equipment combinations". Siemens rejects any and all warranties in the event that third-party products are used. Dimensions All dimensions in mm and inches...