Siemens SCALANCE X-200 Operating Instructions Manual page 196

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
Write Community String
Displays the user name for write access to SNMP variables. Here, changes can only be
made, when write protection (SNMP read only) has been disabled.
Traps
Here, you can enable or disable the sending of SNMP traps.
Syntax of the Command Line Interface
Table 6- 16
Command
info
snmp [A | 3 | D]
readonly
getcomm [string]
setcomm [string]
traps [E ¦ D]
196
Agent SNMP Configuration - CLI\AGENT\SNMP>
Description
Displays information on SNMP.
Enables either [A] all SNMP versions or [3] only
SNMPv3 or [D] disables SNMP.
Enables / disables SNMPv1 read only mode.
Specifies the Read Community string.
Specifies the Write Community string.
Enables / disables SNMPv1 traps.
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200