Siemens SCALANCE X-200 Operating Instructions Manual page 247

Linking in a GSDML file
If the devices are not yet included in STEP 7, follow the steps below:
1. In the dialog box, select HW Config -> Options "Install GSD Files".
Figure 8-2
2. Use "Browse" to navigate to the supplied xml file.
3. Then adopt the file using the "Install" function.
4. Drag the required X-200 IE switches from the hardware catalog to the PROFINET IO
5. Click on the "(1)SCALANCE" icon so that the slots of the SCALANCE are displayed in the
6. By double-clicking on slot 1, you can make the PNIO settings. This includes, for example,
7. After double-clicking on the slots of the ports, you can set their specific parameters.
8. Right-click on the icon of the IE Switch X-200 to open the context menu. Select "Object
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
The following dialog box appears:
Installing the PN IO GSD file
The X-200 IE switches are now included in the module catalog (refer to the module
catalog in the following figure).
system. The inserted IE Switch X-200 appears as an icon in HW Config.
lower part of the screen. By double-clicking on slot=0, you can set the global parameters
of the SCALANCE (substitute module).
the device name, the diagnostics address as well as settings relating to the IO cycle and
media redundancy.
Properties". Enter the device name and set the required IP configuration.
PROFINET IO functionality
8.1 Configuring with PROFINET IO
247