Siemens SCALANCE X-200 Operating Instructions Manual page 165

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
You apply your settings with Set Values.
Syntax of the Command Line Interface
Table 6- 2
info
devname [Device Name]
name [sysName]
contact [sysContact]
location [sysLocation]
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
System Configuration - CLI\SYSTEM>
Command
Shows the current system information.
Sets the "PNIO Device Name" variable.
Sets the "sysName" variable.
Sets the "sysContact" variable.
Sets the "sysLocation" variable.
Configuration / diagnostics using remote mechanisms
Description Comment
Administrator only
Administrator only
Administrator only
Administrator only
165