Installing The Primary Setup Tool - Siemens SCALANCE X-200 Operating Instructions Manual

Configuration / diagnostics using remote mechanisms
6.1 Assignment of an IP address
Downloading the Primary Setup Tool
The Primary Setup Tool is available on the Internet at:
SIEMENS Automation and Drives Service & Support
Entry ID 19440762
http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=xx&objid=194
40762&caller=view (xx = German de, English en, French fr, Italian it, Spanish es)
Supported operating systems
The Primary Setup Tool can be installed and run under the following operating systems:
Windows XP Professional
Windows 2000 Professional SP2
6.1.2.2

Installing the Primary Setup Tool

Procedure
Follow the steps outlined below to install the Primary Setup Tool on your computer:
1. Double-click on the setup.exe file name in the Windows Explorer or start the program with
2. In the Choose Setup Language dialog box, select the language in which you want to
3. The first dialog box of the Installation Wizard appears. Click on the Next button.
4. The dialog box for selecting the installation folder appears. Click on the Next button if you
5. A final dialog box confirms successful installation. Click the Finish button to close this
6. The Primary Setup Tool is now available in the installation folder under the name
148
the Windows menu Start > Run.
make the installation.
want to accept the default C:\Program Files\Siemens\Primary Setup Tool\ . If you want to
specify a different folder, you can open a dialog box for selecting a folder by clicking the
Browse button.
Start installation by clicking the Next button.
dialog box.
s7wnpstx.exe. Before you can use this program, the DLC protocol must be installed on
the computer.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200