Siemens SCALANCE X-200 Operating Instructions Manual page 158

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
Starting Web Based Management and logging on
1. Enter the IP address or the URL of the IE switch in the address box of the Web browser.
Figure 6-5
2. In the "User Name" list box, select the "Admin" entry if you want to change settings of the
3. Enter your password. If you have not yet set a password, the default passwords as
Note
For security reasons, make sure that you change the original factory-set passwords.
Resetting the device also resets the passwords to the factory settings.
4. Click the "Log On" button to start the logon.
158
If there is a problem-free connection to the IE switch, the Logon dialog of Web Based
Management is displayed:
LOGON screen
IE switch (read and write access). If you select the "User" entry, you only have read
access to the configuration data of the IE switch.
shipped apply: Enter admin if you selected "admin" as the user name or user if you
selected "user".
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200