The "Switch Ports" Wbm Menu - Siemens SCALANCE X-200 Operating Instructions Manual

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
6.3.5.28

The "Switch Ports" WBM menu

Switch Ports
This dialog informs you about the current status of the ports. You can also make various port
settings.
Figure 6-33
Port
Shows the port number.
Type
Displays the type of port.
The following port types are available with the IE Switch X-200 modules:
TP 10 TX
TP 100 TX
FO 100 FX
Mode
Shows transmission rate (10 or 100 Mbps) and the transmission mode (full duplex (FD) or
half duplex (HD)).
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
"Switch Ports" screen
Configuration / diagnostics using remote mechanisms
213