The "Agent Snmp Config Groups" Wbm Menu - Siemens SCALANCE X-200 Operating Instructions Manual

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
Syntax of the Command Line Interface
Table 6- 17
Command
info
traps [E ¦ D]
settrap <entry> <IP> <E ¦ D>
6.3.5.20

The "Agent SNMP Config Groups" WBM menu

Agent SNMP Configuration Groups
In this screen, you create or delete user groups for device access using SNMPv3. You can
decide whether or not members of a group need to authenticate themselves, whether they
communicate with encryption and whether they have read and write permissions.
Figure 6-25
198
Agent Trap Configuration - CLI\AGENT\TRAP>
Description
Shows the trap configuration
table.
Enables / disables traps.
Enables / disables the trap IP
address to be specified.
Agent SNMP Configuration Groups screen
Comment
Administrator only.
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200