Siemens SCALANCE X-200 Operating Instructions Manual page 189

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
Syntax of the Command Line Interface
Table 6- 12
Command
info
mode [A | AM | C | E | D]
static [n-m]
isolated [n-m]
rports [n-m | n-m]
clear
redund [E ¦ D]
SCALANCE X-200
Operating Instructions, 12/2011, A5E00349864-19
Ring Redundancy - CLI\X200\REDUND>
Description
Displays information on the redundancy
modules.
Sets the redundancy mode:
A - Automatic Redundancy Detection
AM - MRP Manager(Auto)/Client
C - MRP Client
E - HSR Manager
D - HSR Client
Specifies the static (fixed) ring port.
Note:
Only for the "HSR Manager" and "HSR-
Client" modes:
Specifies the static (fixed) ring port in the
range n-m.
Specifies the isolated ring port.
Note:
Only for the "HSR Manager" and "HSR-
Client" modes:
Specifies the static (fixed) ring port in the
range n-m.
Specifies the two ring ports in the range n-m. Administrator only.
Resets all redundancy counters to the
original setting.
Enables / disables ring redundancy.
Configuration / diagnostics using remote mechanisms
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
189