The "Switch Pof" Wbm Menu - Siemens SCALANCE X-200 Operating Instructions Manual

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
Syntax of the Command Line Interface
Table 6- 30
Command
info
dcpport [ports]
<enabled ¦ disabled>
6.3.5.34

The "Switch POF" WBM menu

Plastic Optical Fiber Management
This screen displays the diagnostic data for interfaces with plastic FO cables.
Figure 6-37
Here, you can see the currently available link power margin as a numerical value for each
POF port.
224
Switch DCP - CLI\SWITCH\DCP>
Description
Displays the current DCP settings.
Enables or disables the sending of DCP
frames on one or more ports.
Example:
The command "dcpport 1,2,3 rx" specifies
that DCP frames are only received on ports
1-3.
POF Management
Comment
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200