Siemens SCALANCE X-200 Operating Instructions Manual page 208

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SMTP Server IP Port
The IP port over which the mail is sent. If necessary, you can change the default value 25 to
your own requirements in the CLI.
"From" Field
You can enter a text that appears in the "From" field of the E-mail.
Send Test E-Mail
Sends an E-mail with the selected parameters.
Syntax of the Command Line Interface
Table 6- 21
Command
info
mail [E ¦ D]
smtp [IP address] [:port]
from [address]
email [E-mail address]
testmail <test E-mail comment>
208
Agent E-Mail Configuration - CLI\AGENT\EMAIL>
Description
Shows the E-mail configuration.
Enables/disables the mailing
function.
Specifies the IP address and the
port number of the SMTP
server.
Specifies a text that will be
entered in the "From" field of the
E-mail.
Specifies the address to which
an IE switch sends an E-mail.
This address can be up to a
maximum of 50 characters long.
Sends an E-mail for testing.
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200