Siemens SCALANCE X-200 Operating Instructions Manual page 176

Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
System Command Line Interface
Table 6- 6
Command
info
server [IP address] [:port]
fwname
fwload
fwsave
cfgname [file name]
cfgsave
cfgload
logname [file name]
logsave
pkname
pkload
ctname
ctload
176
System Save & Load TFTP - CLI\SYSTEM\LOADSAVE>
Description
Displays information on the
system.
Specifies the IP address or the
port of the TFTP server with
which data will be exchanged.
Specifies the name of the
firmware file.
Loads the firmware from a file.
Saves the firmware in a file.
Specifies the name of a file
(maximum 255 characters) from
which the configuration data will
be loaded or in which this data
will be saved.
Saves the configuration data in
a file.
Loads the configuration data
from a file.
Specifies the name of a file
(maximum 255 characters) in
which the log table is stored.
Saves the log table in a file.
Specifies the name of the file
(maximum 255 characters) that
contains the private SSL key.
Loads the private SSL key from
a file.
Specifies the name of the file
(maximum 255 characters) that
contains the SSL certificate.
Loads the SSL certificate from a
file.
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200