Siemens SCALANCE X-200 Operating Instructions Manual page 152

Configuration / diagnostics using remote mechanisms
6.1 Assignment of an IP address
Figure 6-2
Downloading configuration data to the module
Transfer the configuration data to the device by following the steps outlined below:
1. Select the module you want to configure in the left half of the program window. If an
2. Start the download with one of the steps outlined below:
Figure 6-3
152
Dialog for configuring a module
interface is selected and the input screen for the configuration data is displayed, it is not
possible to download the configuration data.
– Select the Module > Download menu command.
– Click on the second button from the left in the toolbar (S7 modules with yellow arrow).
Dialog for downloading a module
Operating Instructions, 12/2011, A5E00349864-19
SCALANCE X-200