Adding A Web Welcome Logo; Adding A Splash Logo; Adding An Embedded Ui Logo - Polycom QDX 6000 System Administrator's Manual

Adding a Web Welcome Logo

Adding a Splash Logo

Adding an Embedded UI Logo

You can customize the Polycom QDX 6000 system to display your own web
welcome logo instead of the Polycom logo.
To upload a web welcome logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Customise System Logo > Web Welcome Logo, and
follow the onscreen instructions for uploading a logo file.
You can customize the Polycom QDX 6000 system to display your own splash
logo instead of the Polycom logo.
To upload a splash logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Customise System Logo > Splash Logo, and follow the
onscreen instructions for uploading a logo file.
You can customize the Polycom QDX 6000 system to display your own
embedded UI logo instead of the Polycom logo.
To upload an embedded UI logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. Enter the user name and administrator's password, if a password has
been established.
System Location, Appearance, and Tones
7 - 9