Adding A Screen Saver News Feed; Adding A Screen Saver Logo - Polycom VSX Series Administrator's Manual

Adding a Screen Saver News Feed

Adding a Screen Saver Logo

4. Click Utilities > Screen Saver and enter:
— Screen Saver Text — Appears as scrolling text when the system is in
sleep mode. You can use this scrolling text to provide instructions or
next steps for users of the system.
— Logo Screen Text — Appears underneath the logo before the system
goes into sleep mode.
5. Click Update.
You can customize the VSX system to display a news feed when the system is
in sleep mode.
Output upon Screen Saver Activation on the Monitors screen must be set to
Black if you want to display a screen saver news feed.
To configure a screen saver news feed:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Screen Saver, and paste a feed URL into the News Feed
field.
5. Select a stream content, click Submit, and close the stream content
window.
6. Click Update.
You can customize the VSX system to display your own logo instead of the
Polycom logo.
To upload a screen saver logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and administrator's password, if a password has
been established.
, to go to VSX Web.
, to go to VSX Web.
Appearance and Tones
7 - 9