Adding A Web Header Logo; Restoring The Default Logos - Polycom QDX 6000 System Administrator's Manual

Administrator Guide for Polycom QDX 6000 System

Adding a Web Header Logo

Restoring the Default Logos

7 - 10
4. Click Utilities > Customise System Logo > Embedded UI Logo, and
follow the onscreen instructions for uploading a logo file.
You can customize the Polycom QDX 6000 system to display your own web
header logo instead of the Polycom logo.
To upload a web header logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Customise System Logo > Web Header Logo, and
follow the onscreen instructions for uploading a logo file.
To restore the default logos:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. Enter the user name and administrator's password, if a password has
been established.
4. Do the following,
— If you want to restore the screen saver logo, click Utilities > Screen
Saver, click Next, and click
— If you want to restore the web welcome logo, click Utilities >
Customise System Logo > Web Welcome Logo, and click
— If you want to restore the splash logo, click Utilities > Customise
System Logo > Splash Logo, and click
— If you want to restore the embedded UI logo, click Utilities >
Customise System Logo > Embedded UI Logo, and click
— If you want to restore the web header logo, click Utilities > Customise
System Logo > Web Header Logo, and click
.
.
.
.
.