System Location, Appearance, And Tones; Configuring Regional Settings - Polycom QDX 6000 System Administrator's Manual

System Location, Appearance, and
Tones

Configuring Regional Settings

To configure country, language, and
Admin Settings > General Settings > Location. For more information about
each setting, highlight the setting and press Help on the remote control.
To set the date, time, and location:
1. Go to System > Admin Settings > Location.
2. Select and configure these settings on the Time Zone screen:
Setting Description
Auto Adjust for Specifies the daylight savings time setting. When you enable
Daylight Saving this setting, the system clock automatically changes for
Time daylight saving time.
Time Zone Specifies the time difference between GMT (Greenwich
Mean Time) and your location.
Time Server Specifies connection to a time server for automatic system
time settings.
The date and time must be manually reset every time a
Polycom QDX 6000 systemrestarts, in the following cases:
•
•
Time Server Specifies the address of the time server to use when Time
Address Server is set to Manual.
ong-distance dialing, go to System >
I
Time Server is set to Off
Time Server is set to Manual or Auto, but the system
cannot connect to a time server successfully.
7
7 - 1