Polycom QDX 6000 System Administrator's Manual page 77

3. Select and configure these settings:
Setting
Require Login for System
Access
User ID
User Password
4. Select and configure these settings:
Setting
Enable Remote
Access
AES Encryption
Description
Specifies whether the system automatically prompts
users to log in when the system comes out of sleep
mode. Enabling this setting requires a login to use
the system.
Specifies the ID for the user account.
Specifies the password for the user account. To
enter numbers, use the number buttons on the
remote or keypad. To enter letters, press
Keyboard on the remote or keypad.
Description
Specifies whether to allow remote access to the system by:
• Web
• Telnet
• SNMP
You may select any of these, or any combination of them.
Note: The system restarts if you change the remote access
settings. This setting does not deactivate the associated
port, only the application. Use Web Access Port to disable
the port.
Specifies how to encrypt calls with other sites that support
AES encryption.
• Off—AES Encryption is disabled.
• When Available—AES Encryption is used with any
endpoint that supports it, even if the other endpoints in
the call don't support it.
• Required for All Calls—AES Encryption is used for all
video endpoints in the call. All endpoints must support
AES Encryption to participate in the call.
Security
8 - 3