Polycom QDX 6000 System Administrator's Manual page 38

Administrator Guide for Polycom QDX 6000 System
3 - 10
Setting Description
Name Specifies a name and icon for the VCR or DVD player.
Video Quality Specifies Motion or Sharpness for the video input.
•
•
6. Select and configure these settingss:
Setting Description
Camera 5 The fifth video source (VGA IN).
Name Specifies a name and icon for the computer or video source.
Video Quality Specifies Motion or Sharpness for the video input.
•
•
7. Select and configure these settings:
Setting
Far Control of Near
Camera
Backlight
Compensation
Primary Camera
Camera Pan
Direction
Motion — This setting is for showing people or other
video with motion.
Sharpness — The picture will be sharp and clear, but
moderate to heavy motion at low call rates can cause
some frames to be dropped. Sharpness is available in
point-to-point H.263 and H.264 calls only.
Motion — This setting is for showing people or other
video with motion.
Sharpness — The picture will be sharp and clear, but
motion will not be smooth. Choose this setting for
document cameras. Sharpness is available in
point-to-point H.263 calls only.
Description
Specifies whether the far site can pan, tilt, or zoom the
near-site camera. When this option is selected, a user at
the far site can control the framing and angle of the camera
for the best view of the near site.
Specifies whether to have the camera automatically adjust
for a bright background. Backlight compensation is best
used in situations where the subject appears darker than
the background.
Specifies which camera is the main camera. The primary
camera is active when the Polycom QDX 6000 system
powers up. Its source is automatically set to People.
Specifies the direction the camera moves when using the
arrow buttons on the remote control.