Configuring Meeting Captions; Configuring Rolling Captions - Polycom QDX 6000 System Administrator's Manual

Administrator Guide for Polycom QDX 6000 System

Configuring Meeting Captions

Configuring Rolling Captions

5 - 4
To configure the meeting caption:
1. Go to System > Utilities> Meeting Caption.
2. Configure these settings on the Meeting Caption screen:
setting
Enable Meeting Caption
Meeting Name
Color
Caption Position
To configure the rolling caption:
1. Go to System > Utilities > Rolling Caption.
2. Configure these settings on the Rolling Caption screen:
description
Specifies whether to display the meeting
name to all sites in a call.
Specifies the meeting name used for this
system. Meeting names can contain up to
10 double-byte or 20 single-byte letters,
numbers, symbols, and Chinese
characters.
Sets the display color of the meeting
name.
Specifies the display position of the local
meeting name.
• Top Left - The meeting name is
shown in the upper left corner of the
screen.
• Top Right - The meeting name is
shown in the upper right corner of the
screen.
• Bottom Left - The meeting name is
shown in the lower left corner of the
screen.
• Bottom Right - The meeting name is
shown in the lower right corner of the
screen.