Managing The System Remotely; Using The Polycom Qdx 6000 Web Interface; Accessing The Polycom Qdx 6000 Web Interface - Polycom QDX 6000 System Administrator's Manual

Managing the System Remotely

Using the Polycom QDX 6000 Web Interface

Accessing the Polycom QDX 6000 Web Interface

You can configure, manage, and monitor the system from a computer using
the system's web interface. You can also use Polycom CMA, SNMP, or the API
commands.
• The Polycom QDX 6000 Web Interface requires only a web browser.
• Polycom CMA requires the management application to be installed on
your network.
• SNMP requires network management software on your network
management station.
• For more information about the API commands, refer to the API Reference
Manual for Polycom QDX 6000 Systems.
You can use the Polycom QDX 6000 web interface to perform most of the
calling and configuration tasks you can perform on the local system.
To configure your browser to use the Polycom QDX 6000 web interface:
1. Be sure that you use Microsoft Internet Explorer 6.x, 7.x,or 8.x as your
web browser.
2. Configure the browser to allow cookies.
9
9 - 1