Screen Savers; Adding Screen Saver Text; Adding A Screen Saver Logo - Polycom HDX Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Screen Savers

Adding Screen Saver Text

Adding a Screen Saver Logo

7 - 8
You can customize the Polycom HDX system to display text when the system
is in sleep mode. For instance, you can display on-screen instructions to assist
users with what steps they should take next.
Output upon Screen Saver Activation on the Monitors screen must be set to
Black if you want to display screen saver text.
To enter screen saver text:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Screen Saver and enter:
— Screen Saver Text — Appears as scrolling text when the system is in
sleep mode. You can use this scrolling text to provide instructions or
next steps for users of the system.
— Logo Screen Text — Appears underneath the logo before the system
goes into sleep mode.
5. Click Update.
You can customize the Polycom HDX system to display your own logo instead
of the Polycom logo.
To upload a screen saver logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the web interface.
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Screen Saver, click Next, and follow the onscreen
instructions for uploading a logo file.
, to go to the web interface.