Adding A Screen Saver Logo - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series
4 - 52
To configure a screen saver news feed:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Screen Saver, and paste a feed URL into the News Feed
field.
5. Select a stream content, click Submit, and close the stream content
window.
6. Click Update.

Adding a Screen Saver Logo

You can customize the VSX system to display your own logo instead of the
Polycom logo.
To upload a screen saver logo:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
3. Enter the user name and administrator's password, if a password has
been established.
4. Click Utilities > Screen Saver, click Next, and follow the onscreen
instructions for uploading a logo file.
, to go to VSX Web.
, to go to VSX Web.