Configuring The Global Directory - Polycom QDX 6000 System Administrator's Manual

Configuring the Global Directory

To create a localized directory entry using the Polycom QDX 6000 web interface:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13, to go to the Polycom QDX 6000 web interface.
3. Go to Place a Call > Directory.
Edit an entry to enter a localized directory entry name in the Localized Name
field, and specify the language for the localized directory entry.
The global directory provides a list of other systems that are registered with
the Global Directory Server and available for calls. The other systems appear
in the directory, allowing users to place calls to other users by selecting their
names.
You can configure the system to use one of the following directory servers.
Directory
Servers Authentication
Supported Protocols
Polycom GDS Proprietary
LDAP with Any of the
H.350 or following:
Active
• NTLM
Directory
• Basic
• Anonymous
LDAP by a NTLM only
Polycom CMA
system
Global
Directory
Groups Entry Calling Information
Not Supported May include: H.323 IP
address (raw IP address,
DNS name, or H.323
extension)
Not Supported May include:
• H.323 IP address (raw
IP address, DNS
name, H.323 dialed
digits, H.323 ID, or
H.323 extension)
• SIP address (SIP URI)
Pre-defined May include: H.323 dialed
groups from digits, H.323 ID, or H.323
the LDAP extension
directory are
shown in
Polycom QDX
6000 system's
directory
Calling and Answering
6 - 5