Setting The Speaker Volume; Configuring Audio Settings; General Audio Settings - Polycom QDX 6000 System Administrator's Manual

Setting the Speaker Volume

Configuring Audio Settings

General Audio Settings

To set the volume of an external speaker system:
1. Go to System > Diagnostics >Audio > Speaker Test.
2. Start the speaker test.
3. Adjust the volume of the speaker system. From the center of the room the
test tone should be as loud as a person speaking loudly, about 80-90 dBA
on a sound pressure level meter.
To configure general audio settings:
1. Go to System > Admin Settings >Audio > Audio Settings.
2. Configure these settings on the Audio Settings screen:
Setting
Sound Effects
Volume
Incoming Video Call
User Alert Tones
Mute Auto Answer
Calls
To configure audio input/output settings:
1. Go to System > Admin Settings >Audio > Inputs/Outputs.
2. Configure these settings on the Audio Input screen:
Description
Sets the volume level of the ring tone and user alert
tones.
Specifies the ring tone used for incoming calls.
Specifies the tone used for user alerts.
Specifies whether to mute your microphone when auto
answering incoming calls.
when auto answering incoming calls, your microphone is
muted by default until you press the mute button on the
microphone or on the remote control.
Microphones and Speakers
4 - 3