Configuring Camera Settings And Video Quality Options - Polycom QDX 6000 System Administrator's Manual

Administrator Guide for Polycom QDX 6000 System

Configuring Camera Settings and Video Quality Options

3 - 8
To configure camera and video settings:
1. Go to System > Admin Settings > Cameras.
2. Configure these settings on the Cameras screen:
Setting
Camera 1
Name
Video Quality
Camera Pan/Tile
Speed
Detect Camera
3. Select and configure these settings:
Setting
Camera 2
Description
The camera's aspect ratio:
• 4:3 — You are using a regular camera.
• 16:9 — You are using a camera in wide-screen mode.
Polycom EagleEye SD
The camera's format:
S-Video — The camera is connected to the Polycom QDX
6000 system using an S-Video cable.
Specifies a name and icon for the camera.
Specifies Motion or Sharpness for the video input. The
default is Sharpness.
• Motion — This setting is for showing people or other
video with motion.
• Sharpness — The picture will be sharp and clear, but
moderate to heavy motion at low call rates can cause
some frames to be dropped.
Sets the camera pan rate.
• Slow - The camera pans at a low rate.
• Medium - The camera pans at a medium rate.
• Fast - The camera pans at a high rate.
Detects any supported PTZ camera connected to Polycom
QDX 6000 system video input 1 and configures the camera
settings accordingly.
Description
Specifies the camera's aspect ratio:
• 4:3 — Select if you are using a regular camera.
• 16:9 — Select if you are using a wide-screen camera.
The camera's format:
Composite — The camera is connected to the Polycom
QDX 6000 system using a composite video cable.