H Selecting The Dte Drop/Insert Or Data Port For Led Display - Paradyne 3160 Operator's Manual

Operation
Selecting the DTE Drop/Insert or Data Port for LED
Display
"
3-12
Use the LED command on the Control branch to select which port's (DTE
Drop/Insert or data port) status appears on the five shared LEDs on the front
panel.
Procedure
To select a port for LED display:
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select LED.
Control:
Call Rel
F1
The currently selected port name appears on the top line of the LCD. DTE
indicates the DTE Drop/Insert (DSX-1) port.
LED Dsply: DTE
DTE Prt1
F1
4. From the LED Dsply screen, press the Function key that corresponds to the
DTE Drop/Insert (DSX-1) or data port for which you want the LEDs to display.
Use the scroll keys, if necessary.
Select DTE to monitor the DTE Drop/Insert (DSX-1) port's SIG, OOF, ALRM,
PDV, and BPV status signals on the shared LEDs.
Select a particular data port to monitor the data port's DTR, TXD, RXD, CTS,
and RTS control signals on the shared LEDs.
March 1999
LED
F3
F2
Prt2
F2 F3
key until the Ctrl selection
3160-A2-GB21-80