Aborting A Lamp Test - Paradyne 3163 User Manual

ACCULINK 3163 DSU/CSU
Test:
Lpbk
F1
4. From the Lamp Test screen, select Start.
Lamp Test:
Abort
F1
5. The following screens alternately appear on the
LCD until you press a Function key to return to
the Lamp Test screen. In addition, all LEDs blink.
F1
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F1
6. When you are satisfied that all LEDs are lighting
and the LCD is functioning properly, abort the
Lamp test from the Lamp Test screen. If there is
no activity on the DSU/CSU front panel for five
minutes, the Device Health and Status screen
appears automatically. However, the Lamp test
remains active until it is aborted.
4-18
Ptrns Lamp
F2 F3
Start
F3
F2
F3
F2
F3
F2

Aborting a Lamp Test

"
Procedure
To abort the Lamp test:
1. Display the Lamp Test screen. To do this when the
LCD is alternating the Lamp test screens, press
any Function key. Otherwise, follow Steps 1
through 3 for starting a Lamp test.
2. From the Lamp Test screen, select Abort.
March 1999
Lamp Test:
Abort Start
F1 F2 F3
Lamp Test:
Abort Start
F3
F1 F2
3163-A2-GB20-10