Filtering Of Error Information - Hitachi XP P9500 User Manual

#1
For Windows Server 2003 (excluding the x86 edition) and Windows
Server 2008 (excluding the x86 edition), Program Files is Program
Files (x86).
#2
The underlined part indicates the folder specified during the installation.
After obtaining these files, be sure to also copy them to a backup
location.
For details on error levels, see
Note
To collect logs, HDLM uses the Hitachi Network Objectplaza Trace Library
service. If this service is not active, start it by doing the following:
From Control Panel, choose Administrative Tools and then Services
to open the Services window. From the list of services, select Hitachi
Network Objectplaza Trace Monitor 2, and then from the Action
menu choose Start.

Filtering of Error Information

Errors detected by HDLM are classified into various error levels.
Error Levels on page 2-34
severe.
Error level
Critical
Error
Warning
Information
Error information is filtered by error level, and then collected.
The error information in error logs and in the event log is collected based on
the user-defined collection level. The collection levels are as follows:
Collection levels for error logs and event logs:
The event log always collects error information from the selected error
level and higher.
The error log can collect information from any of the following levels:
¢
2-34
lists the error levels, in the order of most to least
Fatal errors that may stop the system.
Errors that adversely affect the system. This type of
error can be avoided by performing a failover or other
countermeasures.
Errors that enable the system to continue but, if left,
might cause the system to improperly operate.
Information that simply indicates the operating
history when the system is operating normally.
Collects no error information.
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Filtering of Error Information on page
Table 2-8 Error Levels
Meaning
2-34.
Table 2-8
Level shown in
Event Viewer
Error
Error
Warning
Information