When A User Changes The Intermittent Error Information - Hitachi XP P9500 User Manual

When a User Changes the Intermittent Error Information

The following might be reset when a user changes any of the values set for
the intermittent error or the path status: the number of errors that have
already been counted during error monitoring, the amount of time that has
passed since error monitoring has started, and the information about whether
an intermittent error has occurred.
Changing the Intermittent Error Information on page 2-28
above items are reset.
If you want to check whether intermittent error monitoring is being used for a
path, check the IEP item displayed when the dlnkmgr command's view -path
operation is executed with the -iem parameter specified, or the Intermittent
Error Path item specified in the Path List view of the HDLM GUI. If 0 or
greater is displayed in the Intermittent Error Path item, then intermittent
error monitoring is being performed.
Table 2-6 When Effects of a User Changing the Intermittent Error
Changing the
intermittent error
monitoring settings
Changing the
automatic failback
settings
2-28
User operation
Turning off
Changing the conditions for
an intermittent error while
intermittent error monitoring
is being performed
Turning intermittent error
monitoring on by executing
the set operation, (but not
changing the conditions)
while intermittent error
monitoring is being
performed
Clicking the Apply or OK
button in the HDLM GUI
Options window
intermittent error monitoring
is being performed
Changing the intermittent
error monitoring conditions
while intermittent error
monitoring is not being
performed
Turning off
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Table 2-6 When Effects of a User
Information
Number of
errors and time
passed since
error
monitoring
started
Reset
#2
Reset
#3
while
(Not applicable)
(Not counted.)
Reset
lists whether the
Information
about paths
not subject to
automatic
failback
#1
Reset
Inherited
Inherited
Reset