Hitachi XP P9500 User Manual page 303

Message ID
KAPL01097-W All the current trace files will be
deleted. Is this OK? [y/n]
KAPL01098-W The storage system (aa...aa,
bb...bb) cannot perform the
cc...cc operation in units of CHA
ports.
KAPL01100-I aa...aa
KAPL01101-W The target HBA port was not
found. Operation name =
aa...aa
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Message Text
Messages
Explanation
Details
If you set a value that is less than
the current value of the trace file
size or number of trace files, all
the current trace files will be
deleted. To continue the
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute the
operation of the HDLM command,
enter y. If you want to terminate
processing, enter n.
Details
Multiple paths cannot be set to
Offline or Online at the same
time, via a specific CHA port on
the EMC DMX series, EMC CX
series, or HP EVA series.
aa...aa: Vendor ID
bb...bb: Product ID
cc...cc: offline or online
Action
Execute the Offline or Online
command for each, individual
path.
Details
This message indicates the
executed command line.
aa...aa: Executed command
Action
None.
Details
The HBA having the HBA port
WWN specified in the -
hbaportwwn parameter could not
be found.
aa...aa: offline or online
Action
Use the view operation of the
HDLM command (dlnkmgr view -
path -hbaportwwn) to check the
target HBA port WWN. After that,
specify the appropriate HBA port
WWN, and then retry.
8-21