Hitachi XP P9500 User Manual page 278

Key name
remove_lu_force
Legend:
Optional:
¢
¢
#1
Keys that are not specified for an upgrade installation or re-installation
inherit the current key settings.
#2
Specifying an invalid value results in an error.
For details about the function settings, see
Environment) on page
#3
If the value exceeds the maximum value, an error occurs.
#4
You can specify this key only in the following cases:
¢
7-24
#1
on: Enable the LU dynamic
removal function.
off: Disable the LU dynamic
removal function (default).
Using either of the following
values, specify whether to remove
an LU from the HDLM
management target list when all
paths to the LU are disconnected,
even when there are Offline(C)
#2
paths:
on: Remove the LU.
off: Do not remove the LU
(default).
For a new installation:
If no key or setting value is specified, the installer uses the default
values.
For an upgrade installation or re-installation:
If no key or setting value is specified, the installer uses the old HDLM
setting values.
6-15.
For a new installation:
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
#2
Description
set (Sets Up the Operating
Necessity of
definition
Maximu
Upgrade
charact
installat
New
ion or
installat
length
Re-
ion
installat
ion
Optional Optional 3
m
er
#
3