Hitachi XP P9500 User Manual page 230

iLU
ChaPort
Status
Type
IO-Count
IO-Errors
DNum
HDevName
IEP
#
Because both PathID and Status are always displayed, you do not have
to specify any parameters.
In the sub-parameters following -path -item, you can list the paths (-
hdev) and sort the list (-srt). If you omit both parameters, the command
displays information for all the paths in ascending order of AutoPATH_IDs.
These sub-parameters are:
-hdev host-device-name
-stname
-srt {pn|lu|cp}
6-42
Selectable items
#
Displays information only for the paths accessing the specified host
device.
Specify a drive letter to indicate the desired host device. You cannot
specify the host device unless a drive letter has been assigned. The
host-device-name string is case sensitive.
When you specify this parameter, HDevName is displayed by default. It
is not necessary to specify hd for the -item parameter. If the
command ends with the KAPL01064-W or KAPL01013-E message,
follow the recommended action in the message.
Use this parameter for the Thunder 9500V series, Lightning 9900
series, Lightning 9900V series, Hitachi USP, Hitachi AMS2000/AMS/
WMS/SMS series, Universal Storage Platform V/VM, or Virtual Storage
Platform to display the model ID of the storage system in the product
ID element of the DskName field. When this parameter is omitted, the
command displays the product ID or emulation type of the storage
system instead.
For details about the information to be displayed for product IDs, see
Table 6-15 Product ID Displayed by the View -path Operation on page
6-51.
When you use this parameter, DskName is displayed by default. It is
not necessary to specify dn for the -item parameter.
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Sub-parameters
lu
cp
None
type
ic
ie
dnu
hd
iep