Using The Windows Administrative Tool (Performance) To Check Path Information - Hitachi XP P9500 User Manual

To display HDLM component information, execute the dlnkmgr command's
view operation with the -sys parameter specified. The following shows an
example in which the command is executed:
>dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Remove LU
Intermittent Error Monitor
HDLM Manager Ver
Alive
HDLM Alert Driver Ver
Alive
HDLM Driver Ver
Alive
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
>
Among the displayed items, HDLM Manager, HDLM Alert Driver, and HDLM
Driver indicate the HDLM component information.
Also, you can view information for each HDLM component. Execute the
dlnkmgr command's view operation with the -sys and subsequent parameter
specified. The following shows an example in which the command is
executed:
>dlnkmgr view -sys -msrv
>dlnkmgr view -sys -adrv
>dlnkmgr view -sys -pdrv
Using the Windows Administrative Tool (Performance) to
Check Path Information
The HDLM Performance Monitor uses the Windows administrative tool
Performance to display path information.
Note:
¢
4-12
x.x.x-xx
x.x.x-xx
x.x.x-xx
-
The function for checking path information using the Windows
administrative tool is not supported in a non-x86 edition of Windows
Server 2003 or Windows Server 2008.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Windows(R))
: x.x.x-xx
:
: on(extended lio)
: off
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: on
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
ElogMem Size