Uninstalling Hdlm; Preparations For Hdlm Uninstallation; Notes On Uninstalling Hdlm - Hitachi XP P9500 User Manual

The default is 0. You can specify a value from 0 to 500.
If you specify 0, you cannot adjust the number of messages to be output.
If you specify 0 for Lookout Span(Sec), you cannot adjust the number
of messages to be output because the system ignores the Max
Messages / Span setting.
8 After you finish changing the settings, click the OK button.
.
The dialog box closes.
9 Close all of the Hitachi program products that are using Hitachi Network
.
Objectplaza Trace Library, or restart the host.
If you choose to restart the host, you do not need to perform step 10.
10 Restart the services of the HDLM manager and Hitachi Network
.
Objectplaza Trace Library for the Hitachi Network Objectplaza Trace
Library settings to take effect.
From Control Panel, choose Administrative Tools and then Services
to open the Services window.
From the list of services, select DLMManager. Then, from the Action
menu, choose Restart to restart the service.
Next, from the list of services, select Hitachi Network Objectplaza
Trace Monitor 2. Then, from the Action menu, choose Restart to
restart the service.

Uninstalling HDLM

This section explains how to return the operating environment to the way it
was before HDLM was installed.

Preparations for HDLM Uninstallation

• Back up all the data on the host where HDLM is installed. Also, if
necessary, back up the data on the management target device.
• If firewall exceptions have been registered by using the firewall_setup
command, remove them. Make sure that you do not use another Hitachi
Command Suite product to manage the host after uninstalling HDLM.
For details about the firewall_setup command, see
command syntax on page 3-67
Using Global Link Manager on page

Notes on Uninstalling HDLM

Note the following when uninstalling HDLM:
• Depending on the environment, uninstalling HDLM might take some time.
Do not terminate the uninstallation process while a progress bar for
uninstallation is displayed. The following is an approximate calculation of
the time required for an uninstallation:
(1 x number-of-connected-paths) seconds
3-82
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
in Firewall Settings for Managing HDLM by
3-66.
#
firewall_setup