Installing Jre - Hitachi XP P9500 User Manual

\HDLM-installation-folder\config\dlmmgr.xml
\HDLM-installation-folder\config\dlmwebagent.properties
6 Delete the files copied in step 1.
.
7 Restart the host.
.
Note:
When you install HDLM 5.5 or later in an environment where HDLM 5.4 or
earlier was installed, DLMAlertDriver is displayed in the Non-Plug and
Play Drivers area of the Device Manager window. You can delete
DLMAlertDriver by using the procedure below. Note, however, that
leaving DLMAlertDriver on the window will not affect HDLM operations:
a
.
b
.
c
.
d
.
e
.

Installing JRE

HDLM starts the HDLM GUI by using JRE (JRE 5.0_11, 32-bit) from Sun
Microsystems bundled with the Hitachi Command Suite Common Agent
Component. HDLM can also use JRE versions that are not bundled with the
Hitachi Command Suite Common Agent Component to start the HDLM GUI.
Available JRE versions are as follows:
• In Windows Server 2003:
Sun Microsystems JRE 1.4.2_13 (32-bit)
Sun Microsystems JRE 5.0_10 (32-bit)
Sun Microsystems JRE 6.0_04 (32-bit)
Sun Microsystems JRE 6.0_17 (32-bit)
• In Windows Server 2008:
Sun Microsystems JRE 6.0_17 (32-bit)
To install JRE:
1 Download the JRE from the Sun Microsystems website.
.
2 Install the JRE on the host where the HDLM has been installed.
.
Do not install the JRE directly into HDLM-installation-folder\jre_user. If
you do this, uninstall the JRE, and then reinstall it into another folder.
When you install JRE 6.0_04, the C:\Program Files\Java\jre1.6.0_04.
folder is created by default.
3 Copy all the configuration files, including the JRE installation folder, into
.
the following folder:
From the Device Manager window, in the View menu, choose Show
hidden devices.
From the View menu, choose Devices by connection.
Select Non-Plug and Play Drivers to display DLMAlertDriver.
Delete DLMAlertDriver.
Restart the system.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
3-65