Referenced Documents; Document Conventions - Hitachi XP P9500 User Manual

5 Troubleshooting on page
5-1
6 Command Reference on
page 6-1
7 Utility Reference on page
7-1
8 Messages on page 8-1
A Functional Differences
Between Versions of HDLM on
page A-1

Referenced documents

The following Hitachi referenced documents can be found on the applicable
Hitachi documentation CD:
• Hitachi Command Suite Global Link Manager Installation and
Configuration Guide, MK-95HC107
• Hitachi Command Suite Global Link Manager Messages, MK-95HC108
• Hitachi Adaptable Modular Storage 500 User and Reference Guide
• Hitachi Simple Modular Storage Series User's Guide
• Hitachi USP Series User's Guide
• Hitachi Workgroup Modular Storage Series User's Guide
• Thunder9580V Series Disk Array Subsystem User's Guide
• Reference Manual / File Conversion Utility & File Access Library
• Universal Storage Platform V User's Guide
• Universal Storage Platform VM User's Guide
• Virtual Storage Platform User's Guide

Document conventions

Font and symbol conventions are classified as:
• General font conventions
• Conventions in syntax explanations
Chapter
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Description
configure an environment to properly operate HDLM,
such as changing the HDLM management-target devices
that connect paths or replacing the hardware that
makes up a path. Chapter 4 also describes how to check
path information by using the Windows management
tool.
Describes how to troubleshoot a path error, HDLM
failure, or any other problems that you might encounter.
Describes all the HDLM commands.
Describes the HDLM utilities.
Describes information for all the possible messages that
could be output by HDLM. The chapter also explains
what to do in response to each message.
Describes the differences between HDLM versions.
Preface
xiii