System Information; Features Summary; Processor; Memory - HP Integrity rx1600 Operation And Maintenance Manual
Rsvla-0302
Hide thumbs
Also See for Integrity rx1600:
- Deployment manual (85 pages) ,
- Product information (2 pages) ,
- Cable routing manual (2 pages)
Table of Contents
Advertisement
A
System Information
Features Summary
Processor
•
Two processor sockets
•
One or two Itanium 2 CPUs: 1GHz, 1.5MB L2 cache
•
Front-side bus (FSB): 200MHz, double data rate, 6.4GB/s peak data bandwidth
Memory
•
8 memory DIMM slots
•
256MB, 512MB, 1GB and 2 GB standard 184-pin 2.5V DDR2100 registered ECC DIMMs (1.2" height)
•
125MHz memory bus frequency, 250MTransfers/s data, 8 GB/s peak data bandwidth
•
Minimum system memory: 512MB (2x 256MB DIMMs)
•
Maximum system memory: 16GB with 2GB DIMMs
•
DIMMs are installed in pairs or quads
•
Specific four DIMM configuration enables lock-step mode, chip spare (chip kill), and maximum memory bandwidth
I/O Expansion
•
Two PCI-X 133MHz 64bit 3.3V slots
•
Each PCI-X slot on a separate PCI-X bus
•
Top PCI-X slot full length; bottom slot ½ length
•
One 25W or two 15W cards supported
Internal Core I/O
•
Dual channel SCSI U320 controller (LSI SYM53C1030); 1 SCSI channel cabled internally for integrated disks; 1 channel
for 68pin external connector
•
On internal disk backplane, two single connector attachment (SCA)-2 80-pin connectors for hot-plug SCSI disks
•
IDE controller with 1 internal cabled connection for an optional "slim-line" optical device
External core I/O
•
One U320 SCSI 68pin HDCI connector
•
One 10/100/1000Base-T Ethernet LAN port (Broadcom 5701 controller, RJ-45 connector)
•
One 10/100BaseT Ethernet LAN port (Intel 82550 controller, RJ-45 connector)
•
Two USB 2.0 ports
Appendix A
183
Advertisement
Table of Contents
Troubleshooting
