Memory
•
16 DIMM slots on standard memory extender board
•
32 DIMM slots on optional memory extender board
•
Minimum memory size of 1 GB (four 256 MB DIMMs)
•
Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board)
•
256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5V DDR 200, CL2, registered,
ECC
•
200 MHz memory bus frequency, 400 MTransfers/s data, 12.8 GB/s peak data bandwidth
•
DIMMs loaded by quads enable interleaved mode and chip spare
PCI Riser
•
Two dedicated PCI slots (LAN and SCSI)
•
Four hot-pluggable PCI-X 66 MHz, 64-bit, 3.3V, 25W slots with shared busses and I/O. Slots
3 and 4 share a PCI-X bus and slots 5 and 6 share a PCI-X bus
•
Two hot-pluggable PCI-X 133 MHz 64-bit 3.3V 25W slots
Internal Core I/O
•
Dual channel SCSI U320 interface, two internal 68-pin connectors, two 68-pin external
connectors
•
The SCSI backplane is configured as either one or two channels
•
One internal IDE connector for a slim-line optical device (CD and DVD)
•
No floppy connector
External Core I/O
•
Three external DB-9 ports (MP local, auxiliary, remote)
•
Two external USB 2.0 ports
•
Two SCSI Ultra320 68-pin connectors
•
Two 10/100/1000Base-T ethernet LAN port
•
One 10/100 integrated Lights Out Management Processor (iLO MP) LAN port
•
One VGA port
Power Supply Unit
•
1200 W output power
•
Redundant and hot-swappable power supplies
Motherboard Manageability
•
Baseboard Management Controller (BMC)
•
Temperature monitoring and fans regulation by BMC
•
Includes diagnostic panel LED display that shows server health
•
Hardware diagnostics by BMC displayed by diagnostic panel LED
•
IPMI protocol for communication between BMC/server/MP card
•
Locator front/rear LEDs
•
Field replacement units monitoring by BMC
Enhanced Server Manageability Using the iLO MP
•
LAN, telnet, and SSH console
•
Web GUI
•
Serial port for local console
Server Components
19