Ping; Reset; Route - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

C-18 Commands

ping

Syntax
ping host_address [size] [cnt]
Simplified Syntax
ping host_address
ping host_address size
ping host_address cnt
Description
The ping command sends echo frames, composed of random data bits, to a host
to test the IP stack.

reset

Syntax
reset
Description
The reset function reinitializes the hub and performs the power-on self-tests
(POST).
Before the reset begins, you are asked this question:
Are you sure [y/n]?
You can enter the reset command on the command line or press the RESET
button that is recessed on the management module.

route

Syntax
route [add | delete] destination gateway [metric]
route dump
The host address in Internet dot notation.
(Optional). Specifies the number of data
bytes (defaults to 56 bytes).
(Optional). Specifies the number of echo
frames to be sent. (The default is one [1].)