Unpacking The Hub - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

2 Quick Start
7.
8.
9.

Unpacking the Hub

The FDDI Workgroup Hub is shipped separately from the management module
and media port modules. To unpack the hub, follow these steps:
1.
2.
3.
Configuring attachment ports
– Chapter 3: "Configuring Modules"
Setting up the hub for network operations
– Chapter 4: "Setting Addresses";
"Using Station Management Parameters";
"Downloading New Images"
Monitoring hub operations
– Chapter 5: "Getting Hub Information";
"Interpreting the LEDs";
"Using Miscellaneous Commands"
Open the shipping container and carefully remove its contents.
Return all packing materials to the shipping container and save it.
If the hub must be returned, ship it in its original shipping container (or
equivalent), or the warranty will be voided.
Verify that you have received all items on the packing list, and inspect
each item for damage.
The basic package includes the following items:
LinkBuilder FDDI Workgroup Hub (base unit)
LinkBuilder FDDI Workgroup Hub User Guide
LinkBuilder FDDI System Software diskette, version 1.0
Standard ac power cord
Two brackets and eight screws for rack mounting
Four rubber pads for tabletop placement