3Com 3C780 - LinkBuilder FDDI Base Unit User Manual page 139

Description
The set ip command allows you to set the IP address, netmask, and broadcast
address for IP services.
set ler
Syntax
set ler [alarm | cutoff]
Simplified Syntax
set ler alarm
set ler cutoff
Description
The set ler alarm command sets the link error rate (LER) alarm threshold
(fddiPORTLer-Alarm).
The set ler cutoff command sets the link error rate (LER) cutoff threshold
(fddiPORTLer-Cutoff).
Example
When you enter either command, you are prompted for the module number and
the port number.
Module?
Port?
The current settings of the LER alarm and LER cutoff are then displayed:
Current LER Alarm exponent = 7
Current LER Cutoff exponent = 6
You are then prompted to enter a value for either the LER alarm or the LER
cutoff.
NOTE: You must always keep the LER_Alarm parameter larger than the value
entered for the LER_Cutoff parameter.
Commands
C-5